TECHNICAL SPECIFICATION FOR DIGTAL WALL TILES

SR, NO. CHARACTERISTICS EURO STANDARD EN -159/IS 13753 ALIVE VALUE
A DIMENSION & SURFACE QUALITY
1 Dimensions and surface quality ± 0.5% ± 0.2%
2 Deviation in Thickness t 0.6mm ±02mm
3 Straightness of sides ±0.3% ± 0.2%
4 Rectangulartty ±0.5% ±0.3
5 Surface Flatness ±0.5% ±0.3
6 Surface Quality min 95% min 96%
B PHYSICAL PROPERTIES
1 Water Absorption >10% 14-17%
2 Sending Strength > 150 Kg/Cm 2 200 - 250Kg/Cm 2
3 Scratch Hardness (Mohs) Min 3 Min 3
4 Crazing 1 Cycle No crazing at 2 Cycle
C CHEMICAL PROPERTIES
1 Staining Strength MIN CLASS 2 ResIstance to all Acids and Alkalies & Housbold Chemicals.
Except Hydro Flouric Acid
2 Staining Strength MIN CLASS B
D THERMAL PROPERTIES
1 Thermal Shock Resistant to 10 Cycle CONFORMS
2 Thermal Expansion Max - 9E - D6 CONFORMS

TECHNICAL SPECIFICATION FOR CERAMIC FLOOR TILES

SR, NO. CHARACTERISTICS REQUREMENT AS PER ISO 13006 BIIa / EN 176 BII a ISO / EN TESTING METHOD
A DIMENSION & SURFACE QUALITY
1 Deviation in Length & Width
a.The deviation in percent of the average size of each tile (2 or 4 sides) from the work size (w) Max.± 0.6 ISO-10545-2 IS:13630-1
b. The deviation in percent of the average size of each tile (2 or 4 sides) from the average size of the 10 test specimen (20 or 40 sides) Max.± 0.5 ISO-10545-2 IS:13630-1
2 Deviation in Thickness Max.± 5.0% ISO-10545-2 IS:13630-1
3 Deviation in Straightness of sides Max.±0.5% ISO-10545-2 IS:13630-1
4 Deviation in Rectangulanty Max.±0.6% ISO-10545-2 IS:13630-1
5 Surface Flatness
a.Centre curvature (max.) Max.± 0.5% ISO-10545-2 IS:13630-1
b.Edge curvature (max.) Max.± 0.5% ISO-10545-2 IS:13630-1
c.Corner warpage (max.) Max.± 0.5% ISO-10545-2 IS:13630-1
B PHYSICAL PROPERTIES
1 Water Absorption Avg.3 < E < 6% Individual max. 6.5% ISO-10545-3 IS:13630-2
2 Scratch Hardness (Moh's scale) Not Required IS:13630-13
3 Abrasion Resistance Tested as per PEI methodology ISO-10545-7 IS:13630-11
4 Crazing Resistance Required ISO-10545-11 IS:13630-9
5 Modulus of Rupture in N/mm² Avg. 22, Individual min 20 ISO-10545-4 IS:13630-6
C CHEMICAL / THERMAL PROPERTIES
1 Chemical Resistance Required,if agreed ISO-10545-13 IS:13630-8
2 Resistance to household chemicals Class AA, min. ISO-10545-13 IS:13630-8
3 Resistance to staining Class 1, min. ISO-10545-14 IS:13630-8
4 Thermal Shock Required,if agreed ISO-10545-9 IS:13630-5

TECHNICAL SPECIFICATION FOR PARKING TILES

SR, NO. CHARACTERISTICS REQUREMENT AS PER ISO 13006 BIa / EN 176 BIa ISO / EN TESTING METHOD
A DIMENSION & SURFACE QUALITY
1 Deviation in length ± 0.6% ISO-10545-2
2 Deviation in thickness ± 5.0% ISO-10545-2
3 Straightness of sides ± 0.5% ISO-10545-2
4 Rectangularity ± 0.6% ISO-10545-2
B PHYSICAL PROPERTIES
1 Water absorption <0.5% ISO-10545-2
2 MOH's hardness >6 EN101
3 Flexural strength  >35 N/mm2 ISO-10545-4
4 Abrasion resistance <175mm3 ISO-10545-6
5 Breaking strength 1113N ISO-10545-6
Density (gm/cc) >2 ISO-10545-3
C CHEMICAL / THERMAL PROPERTIES
1 Frost resistance Frostproof ISO-10545-12
2 Chemical resistance No damage ISO-10545-13
3 Thermal shock resistance No damage ISO-10545-9
4 Colour resistance  No damage DIN 51094
5 Thermal expansion < 9 x 10-6 ISO-10545-8
6 Stain resistance  Resistance ISO-10545-14
7 Moisture expansion Nil ISO-10545-10

TECHNICAL SPECIFICATION FOR DOUBLE CHARGE PORCELAIN

SR, NO. CHARACTERISTICS REQUREMENT AS PER ISO 13006 BIa / EN 176 BIa ISO / EN TESTING METHOD
A DIMENSION & SURFACE QUALITY
1 Deviation in Length ± 0.6% ISO-10545-2
2 Deviation in Thickness ± 0.5% ISO-10545-2
3 Straightness of Sides ± 0.5% ISO-10545-2
4 Rectangularity ± 0.6% ISO-10545-2
5 Surface Flatness ± 0.5% ISO-10545-2
6 Glosiness - GLOSSMETER
B STRUCTURAL PROPERTIES
1 Water absorption * < 0.5% ISO-10545-3
2 Density (g/cc) > 2 DIN 51082
C MASSIVE MECHANICAL PROPERTIES
1 Flexural Strength * > 27 N/mm ² ISO-10545-4
2 Breaking Strength * 1113 N ISO-10545-4
D SURFACE MECHANICAL PROPERTIES
1 Mohs hardness * > 6 EN 101
2 Abrasion resistance >175 mm ³ ISO-10545-6
3 Skid Resistance (Friction Coefficient) > 0.4 ISO-10545-17
E CHEMICAL PROPERTIES
1 Frost resistance Frost proof ISO-10545-12
2 Chemical Resistance No Damage ISO-10545-13
3 Stain Resistance Resistant ISO-10545-14
F THERMAL PROPERTIES
1 Thermal Shock Resistance No Damage ISO-10545-9
2 Thermal Expansion < 9 x 10-6 ISO-10545-8
3 Moisture Expansion Nil ISO-10545-10

TECHNICAL SPECIFICATION FOR FULLBODY PORCELAIN

SR, NO. CHARACTERISTICS REQUREMENT AS PER ISO 13006 BIa / EN 176 BIa ISO / EN TESTING METHOD
A DIMENSION & SURFACE QUALITY
1 Deviation In Length & Width ± 0.60% ISO-10545-2
2 Deviation In Thickness ± 5.00% ISO-10545-2
3 Straightness Of Sides ± 0.50% ISO-10545-2
4 Rectangularity ± 0.60% ISO-10545-2
5 Surface Flatness ± 0.50% ISO-10545-2
6 Glosiness ACCORDING TO SURFACE FINISH GLOSSMETER
B STRUCTURAL PROPERTIES
1 Water Absorption ≤ 0.50% ISO-10545-3
2 Density (g/cc) > 2 DIN 51082
C MASSIVE MECHANICAL PROPERTIES
1 Flexural Strength * > 35 N/mm ² ISO-10545-4
2 Breaking Strength 1300 N ISO-10545-4
D SURFACE MECHANICAL PROPERTIES
1 Moh’s Hardness >6 EN101
2 Abrasion resistance < 210 mm ³ ISO-10545-6
3 Skid Resistance (Friction Coefficient) > 0.40 ISO-10545-17
E CHEMICAL PROPERTIES
1 Frost Resistance Frost Proof ISO-10545-12
2 Chemical Resistance No Damage ISO-10545-13
3 Stain Resistance Resistance ISO-10545-14
F THERMAL PROPERTIES
1 Thermal Shock Resistance No Damage ISO-10545-9
2 Thermal Expansion < 9 x 10-6 ISO-10545-8
3 Moisture Expansion Nil ISO-10545-10

TECHNICAL SPECIFICATION FOR GVT/PGVT Tiles

SR, NO. CHARACTERISTICS STANDARD AS PER ISO-13006/EN14411 GROUP Bla ALIVE VALUE TEST METHOD
A REGULATORY PROPERTIESZ
1 DEVIATION IN LENGTH & WIDTH ± 0.5% ± 0.1% ISO-10545-2
2 DEVIATION IN THICKNESS ± 5.0% ± 4.0% ISO-10545-2
3 Straightness in side ± 0.5% ± 0.1% ISO-10545-2
4 Rectangularity ± 0.5% ± 0.1% ISO-10545-2
5 Surface flatness ± 0.5% ± 0.2% ISO-10545-2
6 Color difference Unlterned No Chnage ISO-10545-16
Glossiness ACCORDING TO SURFACE FINISH GLOSSOMETER
B STRUCTURAL PROPERTIES
1 Water Absorption < 0.50% < 0.20% ISO-10545-3
2 APPARENT DENSITY > 0.50% > 2.10 g/CC DIN 51082
C MASSIVE MECHANICAL PROPERTIES
1 Modulus of repture Min. 40 N/mm2 > 0.20% ISO-10545-4
1 Impact resistance As per mfg. MIN 0.55 ISO-10545-5
D SURFACE MECHANICAL PROPERTIES
1 Surface abrasion resistance As per mfg. MIN CLASS-3 ISO-10545-5
2 MOH's hardness As per mfg. MIN 4 EN 101
E THERMO HYGROMETRIC PROPERTIES
1 Frost Resistance NO DAMAGE NO DAMAGE ISO 10545-12
2 THERMAL SHOCK RESISTANCE NO DAMAGE NO DAMAGE ISO 10545-9
3 MOISTURE EXPANSION NIL NIL ISO 10545-10
4 THERMAL EXPANSION MAX 9.0 x 10-6 NO DAMAGE ISO 10545-8
5 CRAZING RESISTANCE As. PER MFG MIN 10 CYCLE ISO 10545-11
F CHEMICAL PROPERTIES
1 Chemical Resistance No Damage No Damage ISO-10545-13
2 Stain Resistance Resistance Resistance ISO-10545-14
G THERMO HYGROMETRIC PROPERTIES
1 ANTI SKID (COF) As PER. MFG MATT > 0.52, GLOSSY > 0.21 ISO-10545-17
2 SLIP RESISTANCE (FRICTION CO) As PER. MFG > 144mm2 ISO-10545-17
3 FIRE RESISTANCE As PER. MFG FIREPROOF N.A.
4 LEAD & CADMIUM GIVEN OFF BY GLAZED TILES As PER. MFG DOES NOT YELLD PB & CD ISO-10545-7